95mm diameter NAS (North American Specification) or Wolf Defender tail-lamps with LED illumination in clear SVX style.
If your Land Rover Defender is not fitted with the AMR3850 mouting plinth you will need to acquire this one mouting plinth for each lamp.
The clear lens LED Defender lamps are the exact same lamps as those found on SVX, Fire & Ice, Rough and X-Tech Limited Edition model Defenders and the same as the rear LED lamp upgrade kit found in the official Land Rover Defender accessory/options catalogue.
All of our Defender LED lamps carry the E-mark seal of European approval and are backed by a no quibble two year guarantee.
All of the Defender LED lamps are supplied pre-wired with the correct connectors compatible with the Defender wiring harness from 300Tdi onwards. We can supply compatible female connectors for 200Tdi and earlier models (and the pre ‘99 rectangular fog & Reverse lamps) on request.
Our Defender LED lighting kits are supplied with a compatible LED relay to create a plug and play solution to the common ‘fast-flash’ characteristic when retro-fitting LED indicators.
One minor but unavoidable drawback to using an LED relay is that you will lose the trailer warning lamp function on your dashboard. The trailer lamp will now flash with the indicators whether you have a trailer fitted or not.
If you regularly use your Defender for towing and wish to retain the trailer light warning lamp function then we can supply our LED Loading Module kit that plugs into the indicator circuit. This consists of 2 x loading modules and 2 x wiring harnesses fitted with Defender compatible wiring connectors. This only takes 10-minutes longer to install than a relay but it is our own preferred set-up if you use a caravan, horsebox and/or trailer since it retains the full functionality of the dashboard trailer warning lamp.
WE POST WORLDWIDE